PRODUCT DESCRIPTION
tubular heat exchanger
The tubular heat exchanger is the most widely used one in chemical industry and ethanol production.It is mainly composed of shell, tube plate, heat exchange tube, head, baffle and so on.The required materials can be made of ordinary carbon steel, red copper, or stainless steel.During heat transfer, a fluid enters the joint pipe of the head, flows in the pipe, and flows out of the outlet pipe at the other end of the head.Another type of fluid enters by the pipe of the shell and flows out from another pipe of the shell, which is called the shell side.
| Applied fields |
Petroleum, metallurgy ,industrial, chemical, medical etc. |
| Material |
Customized |
| Life Span |
design life 10 years |
| Manufacturing standards |
GB150,GB151 |
| Certificates |
ISO9001 |
| Lead time |
on the scale of order. Generally, goods can be sent out within 60 days |
| Packing |
Generally, goods are packed according to per request. |
| Shipping |
Qingdao port and Tianjin port |
Different Types of Shell and Tube Heat Exchangers:
Fixed Tubesheet Type:
The structure of tubular heat exchanger is simple, compact and cheap, but the outer tube cannot be cleaned mechanically.The heat exchanger tube bundles are connected to the tube plates, which are welded to the two ends of the shell respectively, and connected to the top cover, the top cover and the shell are equipped with fluid inlet and outlet nozzles.A series of baffles perpendicular to the tube bundles are usually arranged outside the tube.At the same time, the tube and tube plate are rigid in connection with the housing, while the outside of the tube is two different temperature fluid.Therefore, when the temperature difference between the tube wall and the shell wall is large, the difference in thermal expansion between the two causes great temperature difference stress, which leads to tube bending or tube loosening from the tube-plate, or even damage to the heat exchanger.
In order to overcome the temperature difference stress, there must be temperature difference compensation device. In general, when the temperature difference between tube wall and shell wall is more than 50ºC, for safety reasons, the heat exchanger should have temperature difference compensation device.However, the compensation device (expansion joint) can only be used in cases where the temperature difference between the shell wall and the pipe wall is lower than 60~70ºC and the fluid pressure on the shell side is not high.Generally, when the shell side pressure exceeds 0.6mpa, other structures should be considered as the compensation ring is too thick and difficult to expand and lose the function of temperature difference compensation.
Floating Head Type:
One tube plate of the heat exchanger is connected to the shell with a flange. The other tube plate is not connected to the shell so that the tube can expand and contract freely when heated or cooled. However, a top cover is connected to the tube plate, which is called "floating head".Its advantages are: tube bundles can be pulled out for cleaning;The expansion of the tube bundle does not change the constraint of the shell, so when the temperature difference between the two heat exchanger media is large, the difference of the thermal expansion of the tube bundle and the shell will not produce the temperature difference stress.Its disadvantages are complex structure and high cost.
U Shape Tubular Type:
COMPANY INTRODUCTION
Who are us
Shandong WINTECH Technology Co., Ltd. (hereinafter referred to as WINTECH) is located in Zichuan Economic and Technological Development Zone, Shandong Province. It is a high-tech enterprise that develops and manufactures high-efficiency energy-saving heat transfer products. Its core technology has independent intellectual property rights, and has won many provincial or national awards. It is a strategic emerging industry project vigorously advocated by the state. WINTECH has a complete product system, including Fully welded plate heat exchanger, round plate and shell heat exchanger, semi-round plate and shell heat exchanger, air preheater, slurry heat exchanger, GGH heat exchanger, etc. The above products can meet different working conditions of users,WINTECH provides customized products according to the different needs of users ,its products are widely used in petrochemical, electric power, steel, metallurgy, shipbuilding, pharmaceutical and other fields, with Significant features such as energy saving, emission reduction, high efficiency and practicality ,high added value. It is of great significance to promote the development of new efficient, energy-saving and emission-reducing heat transfer industries.
WINTECH has always adhered to the value of "integrity, customer achievement, entrepreneurship and innovation, teamwork". The production process strictly abides by the relevant national and industry standards. The product has formed a perfect quality assurance system from design, manufacture to inspection. It has obtained ISO 9001 quality management system certification, ISO 140001 environmental management system certification, ISO 18001 occupational health and safety management system certification, A2 pressure vessel manufacturing license, the introduction of advanced testing equipment and means at home and abroad have laid a solid foundation for improving the stability and reliability of products and won the trust of users.
What's product we manufacture
Why choose us
We set up all art state of facilities on processing from the uncoiling steel machine, hydraulic oil pressing machine, Gantry milling, resistance welding machine, welding robot, Laser welding machine,testing from complete instruments in our lab, make every set of equipment is dispatched at the qualified controlling.
Basing on our powerful product capability, many certification and awards are achieved. ISO14000, ISO9000, OHSAS18001, CNAS, IAF, ASME make us prodce and supply equipment as per the ASME standard complying with international market consumption, now our clients are from Russia, Uzbekistan, Thailand, South America, India,Indonesia, Malaysia,Iran, Saudi Arabia, Argentina, and other countries and areas.
FAQ
1. Q: Do you manufacture by yourselves?
A: Yes. We are manfacturer and supplier with ASME for foreign market in China.
2.Q: How can we get the quotation asap?
A: The heat exchanger,air preheater is designed and supplied by customers' operating condition on the plant site,
We will design the HE technical data immediately once getting the operation condition from you, and supply quotation to you asap.
3.Q: What operation data do you need from us for the quotation carring?
A : 1. Working temperature
2. Working Pressure
3. What's the lowing medium in heating and cooling pass.
4. MOC of equipment
5. Required size.
6. Required quantity
7. Other specified data
4.Q:What is the MOQ?
A:We accept loose quantity order,any trial orders or mixed order
5.Q:How does your factory do quality control?
A:Quality is priority ,we make relevant strict testing before delivery
Our factory has already obtained ISO9001 quality and ISO 14001
Environmental management system certificate
Audited Supplier 
){kind=link}