Shell and Plate Heat Exchanger in High Temperature for Oil and Gas

• After-sales Service: Video Support
• Warranty: 1 Year
• Certification: ISO, ASME API
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: win-st08
• Application: Heater, Cooler, Vaporizer, Condenser, Heat Recovery
• Principle: Mixing Heat Exchanger
• Style: Plate Type
• Material: Steel
• Delivery: 45-60 Days
• Life Time: 2-3 Years
• Transport Package: Sea Worthy Packing
• Trademark: Wintech
• Origin: China
• HS Code: 841950
• Production Capacity: 1000PCS/Year

Product Description

The tubular heat exchanger is the most widely used one in chemical industry and ethanol production.It is mainly composed of shell, tube plate, heat exchange tube, head, baffle  and so on.The required materials can be made of ordinary carbon steel, red copper, or stainless steel.During heat transfer, a fluid enters the joint pipe of the head, flows in the pipe, and flows out of the outlet pipe at the other end of the head.Another type of fluid enters by the pipe of the shell and flows out from another pipe of the shell, which is called the shell side.







Different Types of Shell and Tube Heat Exchangers:


Fixed Tubesheet Type:
The structure of tubular heat exchanger is simple, compact and cheap, but the outer tube cannot be cleaned mechanically.The heat exchanger tube bundles are connected to the tube plates, which are welded to the two ends of the shell respectively, and connected to the top cover, the top cover and the shell are equipped with fluid inlet and outlet nozzles.A series of baffles perpendicular to the tube bundles are usually arranged outside the tube.At the same time, the tube and tube plate are rigid in connection with the housing, while the outside of the tube is two different temperature fluid.Therefore, when the temperature difference between the tube wall and the shell wall is large, the difference in thermal expansion between the two causes great temperature difference stress, which leads to tube bending or tube loosening from the tube-plate, or even damage to the heat exchanger.

In order to overcome the temperature difference stress, there must be temperature difference compensation device. In general, when the temperature difference between tube wall and shell wall is more than 50ºC, for safety reasons, the heat exchanger should have temperature difference compensation device.However, the compensation device (expansion joint) can only be used in cases where the temperature difference between the shell wall and the pipe wall is lower than 60~70ºC and the fluid pressure on the shell side is not high.Generally, when the shell side pressure exceeds 0.6mpa, other structures should be considered as the compensation ring is too thick and difficult to expand and lose the function of temperature difference compensation.

Floating Head Type:

One tube plate of the heat exchanger is connected to the shell with a flange. The other tube plate is not connected to the shell so that the tube can expand and contract freely when heated or cooled. However, a top cover is connected to the tube plate, which is called "floating head".Its advantages are: tube bundles can be pulled out for cleaning;The expansion of the tube bundle does not change the constraint of the shell, so when the temperature difference between the two heat exchanger media is large, the difference of the thermal expansion of the tube bundle and the shell will not produce the temperature difference stress.Its disadvantages are complex structure and high cost.

U Shape Tubular Type:




U-tube heat exchanger, each tube is bent into a U-shape, both ends are fixed on the same tube plate, each tube can expand and contract freely, so as to solve the heat compensation problem.The tubing has at least two sides. The tube bundles can be pumped and cleaned, and the tubes can expand freely.Its disadvantage is that the inner wall of the pipe is difficult to clean, the pipe is difficult to replace, and there are fewer pipes arranged on the pipe plate.Advantages are simple structure, light weight, suitable for high temperature and high pressure conditions.

Shell and tube heat exchanger is one of our main products for overseas market.We'v designed and fabricated more than 10 sets in the first quarter of year 2020 despite the difficulties of lacking labors






Wintech has construction area of more than 30,000 square meters.



Some of our fabrication machines:

Automatic Welding Robot:







20,000 Tons Hydraulic Machine:









FAQ

1. Q: Do you manufacture by yourselves?
A: Yes. We are manfacturer and supplier with ASME for foreign market in China.

2.Q: How can we get the quotation asap?
A:  The heat exchanger,air preheater is designed and supplied by customers' operating condition on the plant site, We will design the HE technical data immediately once getting the operation condition from you, and supply quotation to you asap. 

3.Q:  What operation data do you need from us for the quotation carring?
A : 1. Working  temperature
     2. Working Pressure
     3. What's the lowing medium in heating and cooling pass.
     4. MOC of equipment
     5. Required size.
     6. Required quantity
     7. Other specified data

4.Q:What is the MOQ? 
A:We accept loose quantity order,any trial orders or mixed order.

5.Q:How does your factory do quality control? 
A:Quality is priority ,we make relevant strict testing before delivery 
Our factory has already obtained ISO9001 quality and ISO 14001 
Environmental management system certificate.